Coravin

Pivot™ Aerator

$19.95

Black

The Pivot™ Aerator, designed to be used with Pivot Wine Preservation Systems, is the perfect accessory for more aromatic and flavorful wine in seconds. This unique accessory rapidly aerates wine as you pour, yielding silky, smooth, aromatic results equivalent to decanting for 60-90 minutes. Not compatible with Coravin Timeless Wine Preservation Systems (those that use a needle to pierce through the cork).

Pivot™ Aerator

How to Use the Pivot™ Aerator

Attach the Pivot™ Aerator

Attach the Pivot™ Aerator to the Pivot Spout.


Pour with the Pivot™ Aerator

Tilt the bottle so the Aerator is over the wine glass. Lightly press Button until wine creates a gentle shower, then release. Press and release as needed to pour the desired amount. Bring the bottle upright to stop the pour.

VID Thumbnail pivot-aerator

How to Use the Pivot™ Aerator

Light, Short Presses

When using the Pivot Aerator, be sure to use light, short presses of the button to maintain a gentle shower.

Designed for Maximum Aeration

The Pivot™ Aerator was designed with small, carefully placed holes to maximize wine's contact with air as you pour.

Pour Smoothly

When pouring with Coravin Wine Preservation Systems, tilt the bottle up so the base of the bottle is higher than the mouth of the bottle.

Product Details

Aerate Wine in Seconds
Aerate Wine in Seconds

Attach the Pivot™ Aerator to the Pivot Spout to aerate wine as you pour, yielding silky smooth results that taste as if you decanted for an hour or more.

Pivot™ Compatible
Pivot™ Compatible

The Pivot™ Aerator fits securely on your Pivot Wine Preservation System, so you can aerate any wine you desire as you pour.

Easy to Clean
Easy to Clean

Clean the Pivot Aerator regularly by rinsing with warm water after each use. For a more thorough cleaning, simply unscrew the head, remove the inner screen from the body and rinse all three parts with warm water.

Size & Weight

Height
1.75 in / 4.4 cm
Width
1 in / 2.5 cm
Length
1 in / 2.5 cm
Weight
0.05 lbs / 0.02 kg

How do I attach the Aerator to a Coravin System?

Ensure that you are using the correct Aerator for your System. Simply push the Aerator on to the Spout of the Coravin System. Ensure it is tightly attached. Then, use your Coravin System as you normally would.

How do I get optimal performance from the Pivot Aerator?

Please follow these helpful tips:

- Clean the Aerator regularly.

- Use short, light presses of the Button until the wine creates a gentle shower, then release the Button.

- Press and release as needed to pour the desired amount of wine.

- CAUTION: Pressing the Button continuously can over-aerate the wine and may cause the Stopper to release while pouring.

How do I clean the Coravin Aerator?

Always rinse and dry your Coravin Aerator after each use.

Over time, sediment or cork particles can build up inside the Aerator leading to performance issues. Follow these steps to clean any version of the Aerator:

(1) Unscrew the Aerator head from the rubber housing.

(2) Remove the screen from the rubber housing.

(3) Soak all three Aerator parts in warm water for a few minutes. Pay attention to the screen to make sure there are no cork particles in the holes.

(4) After soaking the Aerator parts, rinse them under running water. You may see cork particles rinse out.

(5) Once the parts are dry, put the Aerator back together by placing the screen into the rubber housing.

(6) Then screw the Aerator head tightly onto the rubber housing.